CO2 Gas Cylinders 2.6kg Exchange.

• Our 2.6Kg exchange gas bottles come full of CO2.
• With a cylinder shut off valve this gas bottle can dispense up to 400 litres of beer.
• Up to 200L of carbonating and dispensing if used for homebrewing purposes.
• Warning. Co2 gas cylinders can not be sent via Australia Post. Pick up in store only or arrange a courier company to collect.

Features:

• Australian Standard Approved
• Comes with 2.6kg of CO2
• Type 30 thread- Type 30 thread
• Dimensions 47cm high x 14cm diameter
• Black carry handle grip for easy of transport and protection of valve.

Refills:

• Empty cylinders can be refilled by most local homebrew stores around Western Australia. Most places can fill on the spot for you, or they offer a swap and go service.
• These cylinders come with a 10 year approved life span.

• Only use in the upright position or you run the risk of breaking your regulator with liquid CO2
• Need a bigger tank?
• If you are looking for a CO2 with a higher capacity, please see our 6kg CO2 Gas Bottle - Full.
• The 6kg can dispense up to 1000L and carbonate and dispense up to 500L of beer.(Typically 6g of CO2 used per L to dispense. Or 12g of CO2 to carbonate and dispense).

Prior to use:

• We strongly suggest testing your connections prior to leaving the cylinder on.
• Disconnect the gas side of your set up from your kegs.
• Turn on the gas at the black valve
• Turn the grey regulator clockwise until the low pressure side reaches 40psi
• Turn off the black valve at the top of the bottle.
• Wait 2+ Hours (or leave overnight)
• If the left and right pressure gauge on the regulator has dropped or is showing 0psi. Then it is safe to say you have a leak somewhere in the line.
• You will need to check all connections with soapy detergent water to locate the leak.
• We recommend checking all clamped sections, or if you’re using push in fittings, to ensure they’re not bending or being stretched as this will cause a micro leak.