COLD WEATHER WARNING: Do not apply if surface temperature is expected to be below 50° for 48 hours before & after application.

Give yourself the gift of outstanding curb appeal with DOMINATOR Sealers for stone and clay brick pavers. They enhance the life and beauty of your pavers or decorative concrete. There are 2 gloss levels to choose from: GLOSS for a semi-gloss/low gloss wet-look sheen, or MATTE for a color-enhanced wet look with no gloss. Gloss level will depend on the porosity and texture of your surface.

Protect your surface with the breathable, film forming sealer that protects from oil stains and other spills while providing incredible UV protection.

Our professional grade water-based formula provides subtle color enhancement (wet look) while also being low VOC. Breathe easy while applying DOMINATOR sealers since there are no harsh odors. This makes for a seamless cleanup and application process.

Your money goes farther with this product with our amazing coverage rates and 2-4 years before resealing. You will save money and time by reducing maintenance when you seal with DOMINATOR Sealers. Dense stones like travertine should yield a coverage rate of 600-800 square feet per gallon. Bluestone, Flagstone, and Mexican tile and clay pavers are more porous, so a typical coverage rate should be about 400 square feet per gallon. (Be sure to perform a porosity test.)

If you have concrete pavers or decorative concrete, check out DOMINATOR SG+, LG+ and NG+ for the same superior performance, but specifically formulated for your surface.

STONE+ GLOSS

• Keep a clean, WET LOOK, SATIN to GLOSS FINISH and improve the LONGEVITY of your outdoor stone, clay pavers, faux stone and travertine
• EASILY MAINTAIN your exterior surface with our incredible UV PROTECTION. The film forming sealer guards against spills, moisture and other stains.
• BREATHE EASY when applying this sealer due to NO FOUL ODOR and LOW VOCs as so many reviews have noted.
• Your money goes farther with this product – AMAZING COVERAGE RATE 400 to 800 square feet per gallon, (typically one coat), and long lasting protection.
• EASY SPRAY ON APPLICATION using our included QUICK START Guide and available HOW TO Videos.
• Please follow the hardscape manufacturer's recommendation regarding sealing.

One common question that both DIYer's and contractors alike ask is: "How much sealer should I apply?"

The porosity of your pavers is critical to the answer. Think of this as the "sponge factor." The more porous the paver, the more liquid or sealer it will absorb. The first step in figuring out how much sealer you need is determining the porosity of the paver from the start of your project.

Generally, the densest surfaces don't accept much liquid. On the other hand, very porous surfaces will quickly soak up water. Is the surface you want to seal DENSE or POROUS?

Easy Porosity Test

1. Make sure your pavers are clean and dry.

2.Drip a small amount of water onto your paver or surface. (A teaspoon, water dropper, or a steady hand with a water bottle will do the trick!)

3. Count how long it takes for the drop of water to be absorbed by the paver.

Absorbed in 0-3 seconds = EXTREMELY POROUS
Absorbed in more than 8 seconds = EXTREMELY DENSE

Generally, apply 1 coat of sealer to DENSE natural stone and clay surfaces. You may need to apply a second coat to more POROUS stone surfaces.

DO NOT OVER APPLY. Additionally, we recommend applying a texture additive such as Diamond Grit in the final coat to increase traction on particularly smooth surfaces or areas prone to slipping, like pool decks, sloped areas or stairs.

This product will cover 800 square feet per gallon on very DENSE surfaces. You’ll need more product for more POROUS surfaces.